Here is my situation: I have a network of 96 XBee S2B and S2C modules. My application runs on an ARM module and has an XBee S2C module. All modules (in total 97 of them) are in the same network an...

Which library should I be using, and how? Python XBee seems to be only able to send commands in API mode, and I can't find an example of anyone using it to send a string. Maybe I'm misunderstandin...

I'm currently working with Arduino Unos, 9DOFs, and XBees, and I was trying to create a struct that could be sent over serial, byte by byte, and then re-constructed into a struct. So far I have th...

I'm writing a java application which has to communicate with has to communicate with an XBee radio over a usb-cable.To do this , I use the xbee-java API (http://code.google.com/p/xbee-api/) On my ...

I'm building an application to communicate to an Xbee module via the Xbee API. Currently I have something working, but its fairly simple and has quite a few limitations. Sub processPackets() ' th...

I'd like to use an iPhone to monitor output from a remote source using an XBee modem (or other low power wireless device). Ideally, the iPhone can regularly poll the XBee for this information and t...

I've got three XBees. 2x PROs and a standard, all series 2s. I've configured one PRO and one standard to be router/endpoints on channel 0 and PAN 234 (this is the default channel and PAN ID when se...

I am trying to enable wireless programming of an Arduino via the XBee Shield and an XBee Explorer. I've seen two tutorials online, XBee radios and Wireless Bootloading for ATmega168/ATmega328 that ...