Sending AT Commands Via ADB Android [closed]

B

6

12

I have a task at work to investigate if it is possible to send AT commands to an android device via ADB shell. So far,I have tried to echo out the AT commands but it passes them as normal strings. Any help please anyone.

Barcarole answered 12/10, 2012 at 8:54 Comment(2)

I don't think is possible. ADB is not a GSM modem – Elainaelaine 12/10, 2012 at 9:1

I know but i have seen similar post where people have executed at commands successfully with a rooted device. – Barcarole 12/10, 2012 at 9:43

W

9

Please try this:

echo -e "AT+CFUN=?\r\n" > /dev/ttyUSB0

On your phone, the serial line must not necessarily be called ttyUSB0. If this is not working or not available, check out the other entries of the /dev/ directory.
So it could also be /dev/ttyGS0 or /dev/SMD0 (as found out by @Sani).

For further information, please check out this Guide

NOTE:

There might also be phones, that do not respond to AT commands on any of their serial (tty) devices.
I just tried my own procedure on a Samsung Galaxy S4 and did not have any success.

Waldos answered 12/10, 2012 at 9:5 Comment(5)

I have tried this and it does not work. BDW my device is a galaxy ace rooted – Barcarole 12/10, 2012 at 9:47

i HAVE GOTTEN a working solution. I needed to find my device modem which in my case is SMD0 instead of TTYUSB0. I have had a couple commands work and some return OK . Still investigating. Thanks guys. – Barcarole 15/10, 2012 at 9:5

Aaah, that's why I told you to check out the guide. :o) I'll complete my answer in order to match that problem. Thank you for sharing with us! – Waldos 15/10, 2012 at 9:15

If I connect my phone with USB and use /dev/smd0 with adb shell, it works but using same method on Android Terminal Emulator doesn't. What could be wrong? – Barbitone 23/12, 2013 at 19:20

So @Nippey, there is no way to do it on the Galaxy S4? I desperately need to know the TMSI (which changes all the time, "T" stands for Temporary). – Eozoic 7/7, 2014 at 20:30

H

2

Echo them where? In Android you talk to the rild (Radio Interface Layer) daemon, which in turns talks to a proprietary library, which sends commands to the actual hardware. Check rild source code for details. You could probably write a command line program that talks to the rild and execute it via adb shell, if that fits your needs.

Hui answered 12/10, 2012 at 8:58 Comment(2)

It is actually possible. i Have been able to get a couple working and most have returned OK request. – Barcarole 15/10, 2012 at 9:3

Again, echo them where? What command did you issue? ADB is just a means to execute shell command on the phone. You could be able to talk to some serial(-like) device directly, or you may not be able to. This largely depends on the particular phone. – Hui 15/10, 2012 at 9:7

M

1

In order to find out which port to use : You can check

# cat /proc/tty/drivers

Use logcat -b radio | grep dev to see wich tty the radio is using.

Musketry answered 8/9, 2014 at 14:11 Comment(1)

For my Galaxy Note II (GT-N7100) this was /dev/ttySAC2. – Remorseless 12/10, 2016 at 1:37

T

1

Yes you can run AT commands from adb shell too.

Prerequisites:

rooted android phone
you are aware of the port that RIL use for i/o operation.
to check which port is being used by Android's Radio Interface Layer (RIL) use getprop rild.libargs

To run AT command from ADB use:

echo -c "AT\r\n" > /dev/smd11

p.s. /dev/smd11 is port used by RIL. This varies from device to device.

Also to run AT commands from Android application check this tutorial: Executing AT commands from Android Application

Thulium answered 13/1, 2015 at 9:11 Comment(1)

" to check which port is being used by RIl use getprop rild.libargs" but in my case it returns nothing. No text is shown. I am using a Samsung GT-S5301 – Nora 9/9, 2015 at 10:4

E

1

Kind of a combination of the above. We got it working with 2 terminals on a Pixel 4 XL.
On one we did:

cat /dev/smd7

in the other:

echo "AT\r" > /dev/smd7

The output shows up in the first terminal

Notes:

Have to be root!
None of the discovery mechanisms worked for us, so we blindly called into smdX until we got a response from "AT\r".
echo automatically adds a \n, so adding it is redundant.

Extrapolate answered 10/11, 2020 at 21:55 Comment(1)

The only working answer! Got it on redmi note 3 – Stair 30/7, 2021 at 2:52

C

0

Device does not necessarily have to be rooted. I just got a successful return on a test command on a SM-146U (T-Mobile) by running

echo -e "AT+CFUN=?\r\n" > /dev/tty

through basic ADB

Chloral answered 19/4 at 19:44 Comment(0)

Recommended topics

Hot tags