How to calculate the difference between two dates using PHP?

Question

I have two dates of the form:

Start Date: 2007-03-24 
End Date: 2009-06-26

Now I need to find the difference between these two in the following form:

2 years, 3 months and 2 days

How can I do this in PHP?

Glaucous

2 years 94 days. Calculating the months, taking into account leap years, would be problematic. How accurate does this need to be? – Betony

possible duplicate of How do I calculate relative time? – Untimely

Answer 1

Use this for legacy code (PHP < 5.3; Jun 2009). For up to date solution see jurkas' answer above.

You can use strtotime() to convert two dates to unix time and then calculate the number of seconds between them. From this it's rather easy to calculate different time periods.

$date1 = "2007-03-24";
$date2 = "2009-06-26";

$diff = abs(strtotime($date2) - strtotime($date1));

$years = floor($diff / (365*60*60*24));
$months = floor(($diff - $years * 365*60*60*24) / (30*60*60*24));
$days = floor(($diff - $years * 365*60*60*24 - $months*30*60*60*24)/ (60*60*24));

printf("%d years, %d months, %d days\n", $years, $months, $days);

Edit: Obviously the preferred way of doing this is like described by jurka below. My code is generally only recommended if you don't have PHP 5.3 or better.

Several people in the comments have pointed out that the code above is only an approximation. I still believe that for most purposes that's fine, since the usage of a range is more to provide a sense of how much time has passed or remains rather than to provide precision - if you want to do that, just output the date.

Despite all that, I've decided to address the complaints. If you truly need an exact range but haven't got access to PHP 5.3, use the code below (it should work in PHP 4 as well). This is a direct port of the code that PHP uses internally to calculate ranges, with the exception that it doesn't take daylight savings time into account. That means that it's off by an hour at most, but except for that it should be correct.

<?php

/**
 * Calculate differences between two dates with precise semantics. Based on PHPs DateTime::diff()
 * implementation by Derick Rethans. Ported to PHP by Emil H, 2011-05-02. No rights reserved.
 * 
 * See here for original code:
 * http://svn.php.net/viewvc/php/php-src/trunk/ext/date/lib/tm2unixtime.c?revision=302890&view=markup
 * http://svn.php.net/viewvc/php/php-src/trunk/ext/date/lib/interval.c?revision=298973&view=markup
 */

function _date_range_limit($start, $end, $adj, $a, $b, $result)
{
    if ($result[$a] < $start) {
        $result[$b] -= intval(($start - $result[$a] - 1) / $adj) + 1;
        $result[$a] += $adj * intval(($start - $result[$a] - 1) / $adj + 1);
    }

    if ($result[$a] >= $end) {
        $result[$b] += intval($result[$a] / $adj);
        $result[$a] -= $adj * intval($result[$a] / $adj);
    }

    return $result;
}

function _date_range_limit_days($base, $result)
{
    $days_in_month_leap = array(31, 31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31);
    $days_in_month = array(31, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31);

    _date_range_limit(1, 13, 12, "m", "y", &$base);

    $year = $base["y"];
    $month = $base["m"];

    if (!$result["invert"]) {
        while ($result["d"] < 0) {
            $month--;
            if ($month < 1) {
                $month += 12;
                $year--;
            }

            $leapyear = $year % 400 == 0 || ($year % 100 != 0 && $year % 4 == 0);
            $days = $leapyear ? $days_in_month_leap[$month] : $days_in_month[$month];

            $result["d"] += $days;
            $result["m"]--;
        }
    } else {
        while ($result["d"] < 0) {
            $leapyear = $year % 400 == 0 || ($year % 100 != 0 && $year % 4 == 0);
            $days = $leapyear ? $days_in_month_leap[$month] : $days_in_month[$month];

            $result["d"] += $days;
            $result["m"]--;

            $month++;
            if ($month > 12) {
                $month -= 12;
                $year++;
            }
        }
    }

    return $result;
}

function _date_normalize($base, $result)
{
    $result = _date_range_limit(0, 60, 60, "s", "i", $result);
    $result = _date_range_limit(0, 60, 60, "i", "h", $result);
    $result = _date_range_limit(0, 24, 24, "h", "d", $result);
    $result = _date_range_limit(0, 12, 12, "m", "y", $result);

    $result = _date_range_limit_days(&$base, &$result);

    $result = _date_range_limit(0, 12, 12, "m", "y", $result);

    return $result;
}

/**
 * Accepts two unix timestamps.
 */
function _date_diff($one, $two)
{
    $invert = false;
    if ($one > $two) {
        list($one, $two) = array($two, $one);
        $invert = true;
    }

    $key = array("y", "m", "d", "h", "i", "s");
    $a = array_combine($key, array_map("intval", explode(" ", date("Y m d H i s", $one))));
    $b = array_combine($key, array_map("intval", explode(" ", date("Y m d H i s", $two))));

    $result = array();
    $result["y"] = $b["y"] - $a["y"];
    $result["m"] = $b["m"] - $a["m"];
    $result["d"] = $b["d"] - $a["d"];
    $result["h"] = $b["h"] - $a["h"];
    $result["i"] = $b["i"] - $a["i"];
    $result["s"] = $b["s"] - $a["s"];
    $result["invert"] = $invert ? 1 : 0;
    $result["days"] = intval(abs(($one - $two)/86400));

    if ($invert) {
        _date_normalize(&$a, &$result);
    } else {
        _date_normalize(&$b, &$result);
    }

    return $result;
}

$date = "1986-11-10 19:37:22";

print_r(_date_diff(strtotime($date), time()));
print_r(_date_diff(time(), strtotime($date)));

Genesia

If you're using the DateTime class you can go for $date->format('U') to get the unix timestamp. – Malar

It's not true if you have to deal with summer/winter time. In this particular case when you adjust summer/winter time, one day equals 23 or 25 hours. – Taranto

Well, the same argument could be made for leap years. It doesn't take that into account either. Still, I'm not convinced that you even want to take that into account since we're discussing a range here. The semantics for a range are somewhat different than for an absolute date. – Genesia

This function is incorrect. It's good for an approximation, but incorrect for exact ranges. For one, it assumes there are 30 days in a month, which is to say it will have the same difference of days between February 1st and March 1st as it will for July 1st to August 1st (regardless of leap year). – Medic

In PHP, reference variables are in the function signature, not the call. Move all your & to the signatures. – Couvade

Though this is accepted answer but, if you are using PHP 5.3 or greater than please check the following answer on this question https://mcmap.net/q/53725/-how-to-calculate-the-difference-between-two-dates-using-php – Thalamencephalon

Doing math on time is flawed -- use the Date object that is designed to take into account all the possibly variations and exceptions. – Oriel

For absolute diff using specific unit of time, I created the CalendarHelper class on gist => gist.github.com/Cartman34/b2a7e0e08b674b71a458c9a85a810855 – Alber

Answer 2

I suggest to use DateTime and DateInterval objects.

$date1 = new DateTime("2007-03-24");
$date2 = new DateTime("2009-06-26");
$interval = $date1->diff($date2);
echo "difference " . $interval->y . " years, " . $interval->m." months, ".$interval->d." days "; 

// shows the total amount of days (not divided into years, months and days like above)
echo "difference " . $interval->days . " days ";

read more php DateTime::diff manual

From the manual:

As of PHP 5.2.2 [May 2007], DateTime objects can be compared using comparison operators.

$date1 = new DateTime("now");
$date2 = new DateTime("tomorrow");

var_dump($date1 == $date2); // bool(false)
var_dump($date1 < $date2);  // bool(true)
var_dump($date1 > $date2);  // bool(false)

Greensboro

+1 DateTime handles leap years and time-zones properly and there's a good book for the shelf: phparch.com/books/… – Meri

Is there a method that gives the total number of seconds between the two DateTimes? (without adding up the components, that is) – Microsporangium

correct me if i'm wrong but i think it needs to be $interval->days instead of $interval->d !?!?!? – Hyperkinesia

@Panique The $interval->days and $interval->d are different measures. your comment above is right "shows the total amount of days (not divided into years, months and days like above)" – Greensboro

@Microsporangium You probably want $date2->format('U') - $date1->format('U'). – Tonguing

note that there's a bug where DateInterval has an incorrect days property (always 6015) on Windows with some PHP versions: bugs.php.net/bug.php?id=51184 (refer to comments there for fix/workaround) – Dissonancy

what if Date2 is previous to Date1? – Imprimis

@AlejandroMoreno : then $interval->invert will be 1. Why don't you just try it and print_r($interval) and you will see all the properties. – Alexis

It only returns positive values. How to get negative values only? – Peng

but it doesnot compare hours and minutes – Oletaoletha

@ChinmaySarupria $interval->invert tells you the "direction" $diff = $now->diff($future); // $diff->invert = 0 where $diff = $now->diff($past); // $diff->invert = 1 – Cruciferous

When I tried to var_dump the $interval it gives me many options to select the intervals from `y,m,d,h,i,s'.. isn't great? thanks! – Villosity

Although it does not change the outcome, I recommend the use of \DateTimeImmutable instead of DateTime , as, in this case, the two values are value objects (in DDD terms). – Sheelagh

this code return -1 for hour! is it a bug?! date_default_timezone_set('Asia/Tehran'); $from = new DateTime('2019-08-01 09:26:42'); $to = new DateTime('2019-10-01 09:01:11'); $interval = $from->diff($to); echo $interval->h; – Electrophotography

@Nabi K.A.Z. : It's caused for Daylight saving time, Can set date_default_timezone_set('UTC'); for don't have any daylight saving time. – Electrophotography

There does seem to still be a bug for certain timezones: bugs.php.net/bug.php?id=52480 – Streptokinase

If you need a number of years with a fraction, use $interval->days / 365 (doesn't take leap years into account). – Nalchik

with this method, if you happen to have 59 days (30+29), then it becomes "2 months" because it calculates the second month as if it was februrary, makes no sense, dunno how to fix this – Ligamentous

Similar function that calculates diff between two DateTimes. Returns string or array, with "diff parameters" of your choice. gist.github.com/klor/d5c63697374619fcfbd98340627afa09 – Cns

Answer 3

The best course of action is using PHP's DateTime (and DateInterval) objects. Each date is encapsulated in a DateTime object, and then a difference between the two can be made:

$first_date = new DateTime("2012-11-30 17:03:30");
$second_date = new DateTime("2012-12-21 00:00:00");

The DateTime object will accept any format strtotime() would. If an even more specific date format is needed, DateTime::createFromFormat() can be used to create the DateTime object.

After both objects were instantiated, you substract one from the other with DateTime::diff().

$difference = $first_date->diff($second_date);

$difference now holds a DateInterval object with the difference information. A var_dump() looks like this:

object(DateInterval)
  public 'y' => int 0
  public 'm' => int 0
  public 'd' => int 20
  public 'h' => int 6
  public 'i' => int 56
  public 's' => int 30
  public 'invert' => int 0
  public 'days' => int 20

To format the DateInterval object, we'll need check each value and exclude it if it's 0:

/**
 * Format an interval to show all existing components.
 * If the interval doesn't have a time component (years, months, etc)
 * That component won't be displayed.
 *
 * @param DateInterval $interval The interval
 *
 * @return string Formatted interval string.
 */
function format_interval(DateInterval $interval) {
    $result = "";
    if ($interval->y) { $result .= $interval->format("%y years "); }
    if ($interval->m) { $result .= $interval->format("%m months "); }
    if ($interval->d) { $result .= $interval->format("%d days "); }
    if ($interval->h) { $result .= $interval->format("%h hours "); }
    if ($interval->i) { $result .= $interval->format("%i minutes "); }
    if ($interval->s) { $result .= $interval->format("%s seconds "); }

    return $result;
}

All that's left now is to call our function on the $difference DateInterval object:

echo format_interval($difference);

And we get the correct result:

20 days 6 hours 56 minutes 30 seconds

The complete code used to achieve the goal:

/**
 * Format an interval to show all existing components.
 * If the interval doesn't have a time component (years, months, etc)
 * That component won't be displayed.
 *
 * @param DateInterval $interval The interval
 *
 * @return string Formatted interval string.
 */
function format_interval(DateInterval $interval) {
    $result = "";
    if ($interval->y) { $result .= $interval->format("%y years "); }
    if ($interval->m) { $result .= $interval->format("%m months "); }
    if ($interval->d) { $result .= $interval->format("%d days "); }
    if ($interval->h) { $result .= $interval->format("%h hours "); }
    if ($interval->i) { $result .= $interval->format("%i minutes "); }
    if ($interval->s) { $result .= $interval->format("%s seconds "); }

    return $result;
}

$first_date = new DateTime("2012-11-30 17:03:30");
$second_date = new DateTime("2012-12-21 00:00:00");

$difference = $first_date->diff($second_date);

echo format_interval($difference);

Quartersaw

DateTime() is not a function, it's an object, and it's there since PHP 5.2. Make sure that your server supports it. – Eisen

@SecondRikudo DateTime::Diff need PHP 5.3.0 – Belita

We have a problem, exchange first_date to second_date and we're getting same result? Why not say 0 days 0 hours 0 minutes 0 seconds or only 0. Example: 2012-11-30 17:03:30 - 2012-12-21 00:00:00 and 2012-12-21 00:00:00 - 2012-11-30 17:03:30 get same result. – Tragic

Because diff gives you the difference between the two times. The difference is not 0 regardless of which date comes later. – Eisen

This is a really good answer as it provides a clear function that can be called from anywhere in a codebase without lots of time calcs. Others answers allow you to drop echoed calcs on the fly that address the symptoms rather than solve the problem... The only element I've added (and pretty much all other posts don't cover this) is the pluralisation of $interval elements if more than 1. – Forestall

I used exactly that but I have a big issue, if you happen to have 59 days (30+29), then it becomes "2 months" because it calculates the second month as if it was februrary, makes no sense, dunno how to fix this – Ligamentous

ah no sry, my problem is that I provided a duration, not two dates – Ligamentous

Answer 4

View Hours and Minuts and Seconds..

$date1 = "2008-11-01 22:45:00"; 

$date2 = "2009-12-04 13:44:01"; 

$diff = abs(strtotime($date2) - strtotime($date1)); 

$years   = floor($diff / (365*60*60*24)); 
$months  = floor(($diff - $years * 365*60*60*24) / (30*60*60*24)); 
$days    = floor(($diff - $years * 365*60*60*24 - $months*30*60*60*24)/ (60*60*24));

$hours   = floor(($diff - $years * 365*60*60*24 - $months*30*60*60*24 - $days*60*60*24)/ (60*60)); 

$minuts  = floor(($diff - $years * 365*60*60*24 - $months*30*60*60*24 - $days*60*60*24 - $hours*60*60)/ 60); 

$seconds = floor(($diff - $years * 365*60*60*24 - $months*30*60*60*24 - $days*60*60*24 - $hours*60*60 - $minuts*60)); 

printf("%d years, %d months, %d days, %d hours, %d minuts\n, %d seconds\n", $years, $months, $days, $hours, $minuts, $seconds); 

Syrup

Probably this will not give the accurate result. – Booze

And is a terrible solution unless you're forced to use a terribly outdated version of PHP ... – Reincarnate

Not so DRY. For instance, 60*60*24 is repeated 15 times. Long live copy-paste reuse! – Kanter

What about leap years? A year is not 365 days on average. – Kanter

This code assumes a month is 30 days on average. Even assuming 365 days for a year, an average month is 365 / 12 = 30.42 days (approx.). – Kanter

This code is dead wrong and should not be used for any serious purpose. – Kanter

Even if the constants were adjusted, it would still only be correct on average, and not between any two particular dates. – Kanter

this is useful in one particular case, example you want to format the time a user has spent on your site, this is not dependant on the month/year length, and if you use the usual methods with datetime it will be very inaccurate if it reaches 2months+. Just wondering if there are native php ways to do it, can't find any – Ligamentous

Answer 5

Take a look at the following link. This is the best answer I've found so far.. :)

function dateDiff ($d1, $d2) {

    // Return the number of days between the two dates:    
    return round(abs(strtotime($d1) - strtotime($d2))/86400);

} // end function dateDiff

It doesn't matter which date is earlier or later when you pass in the date parameters. The function uses the PHP ABS() absolute value to always return a postive number as the number of days between the two dates.

Keep in mind that the number of days between the two dates is NOT inclusive of both dates. So if you are looking for the number of days represented by all the dates between and including the dates entered, you will need to add one (1) to the result of this function.

For example, the difference (as returned by the above function) between 2013-02-09 and 2013-02-14 is 5. But the number of days or dates represented by the date range 2013-02-09 - 2013-02-14 is 6.

http://www.bizinfosys.com/php/date-difference.html

Aleenaleetha

The question asked for the difference as the number of years, months and days, not the total number of days. – Kanter

Awesome man, Worked for me to get the diff in days, Thank you – Katrinka

Answer 6

<?php
    $today = strtotime("2011-02-03 00:00:00");
    $myBirthDate = strtotime("1964-10-30 00:00:00");
    printf("Days since my birthday: ", ($today - $myBirthDate)/60/60/24);
?>

Dairy

The question asked for the difference as the number of years, months and days. This outputs the difference as the total number of days. – Kanter

Answer 7

I voted for jurka's answer as that's my favorite, but I have a pre-php.5.3 version...

I found myself working on a similar problem - which is how I got to this question in the first place - but just needed a difference in hours. But my function solved this one pretty nicely as well and I don't have anywhere in my own library to keep it where it won't get lost and forgotten, so... hope this is useful to someone.

/**
 *
 * @param DateTime $oDate1
 * @param DateTime $oDate2
 * @return array 
 */
function date_diff_array(DateTime $oDate1, DateTime $oDate2) {
    $aIntervals = array(
        'year'   => 0,
        'month'  => 0,
        'week'   => 0,
        'day'    => 0,
        'hour'   => 0,
        'minute' => 0,
        'second' => 0,
    );

    foreach($aIntervals as $sInterval => &$iInterval) {
        while($oDate1 <= $oDate2){ 
            $oDate1->modify('+1 ' . $sInterval);
            if ($oDate1 > $oDate2) {
                $oDate1->modify('-1 ' . $sInterval);
                break;
            } else {
                $iInterval++;
            }
        }
    }

    return $aIntervals;
}

And the test:

$oDate = new DateTime();
$oDate->modify('[phone] seconds');
var_dump($oDate);
var_dump(date_diff_array(new DateTime(), $oDate));

And the result:

object(DateTime)[2]
  public 'date' => string '2014-04-29 18:52:51' (length=19)
  public 'timezone_type' => int 3
  public 'timezone' => string 'America/New_York' (length=16)

array
  'year'   => int 3
  'month'  => int 6
  'week'   => int 1
  'day'    => int 4
  'hour'   => int 9
  'minute' => int 3
  'second' => int 8

I got the original idea from here, which I modified for my uses (and I hope my modification will show on that page as well).

You can very easily remove intervals you don't want (say "week") by removing them from the $aIntervals array, or maybe adding an $aExclude parameter, or just filter them out when you output the string.

Medic

Unfortunately this doesn't return the same thing as DateInterval because of year/month overflows. – Dionedionis

@StephenHarris: I haven't tested this, but by reading the code I'm pretty confident it should return the same result - provided that you delete the week index in $aIntervals (since DateDiff never uses that). – Malayalam

This is a great solution for finding dates that occur every interval between two dates. – Bit

Answer 8

I don't know if you are using a PHP framework or not, but a lot of PHP frameworks have date/time libraries and helpers to help keep you from reinventing the wheel.

For example CodeIgniter has the timespan() function. Simply input two Unix timestamps and it will automatically generate a result like this:

1 Year, 10 Months, 2 Weeks, 5 Days, 10 Hours, 16 Minutes

http://codeigniter.com/user_guide/helpers/date_helper.html

Gambado

Answer 9

Here is the runnable code

$date1 = date_create('2007-03-24');
$date2 = date_create('2009-06-26');
$diff1 = date_diff($date1,$date2);
$daysdiff = $diff1->format("%R%a");
$daysdiff = abs($daysdiff);

Micronesian

Answer 10

use this function

//function Diff between Dates
//////////////////////////////////////////////////////////////////////
//PARA: Date Should In YYYY-MM-DD Format
//RESULT FORMAT:
// '%y Year %m Month %d Day %h Hours %i Minute %s Seconds' =>  1 Year 3 Month 14 Day 11 Hours 49 Minute 36 Seconds
// '%y Year %m Month %d Day'                       =>  1 Year 3 Month 14 Days
// '%m Month %d Day'                                     =>  3 Month 14 Day
// '%d Day %h Hours'                                   =>  14 Day 11 Hours
// '%d Day'                                                 =>  14 Days
// '%h Hours %i Minute %s Seconds'         =>  11 Hours 49 Minute 36 Seconds
// '%i Minute %s Seconds'                           =>  49 Minute 36 Seconds
// '%h Hours                                          =>  11 Hours
// '%a Days                                                =>  468 Days
//////////////////////////////////////////////////////////////////////
function dateDifference($date_1 , $date_2 , $differenceFormat = '%a' )
{
    $datetime1 = date_create($date_1);
    $datetime2 = date_create($date_2);

    $interval = date_diff($datetime1, $datetime2);

    return $interval->format($differenceFormat);

}

only set parameter $differenceFormat As your need example I want Diff between to years with months and days your age

dateDifference(date('Y-m-d') , $date , '%y %m %d')

or other format

dateDifference(date('Y-m-d') , $date , '%y-%m-%d')

Surfboarding

Answer 11

I would prefer to use date_create and date_diff objects.

Code:

$date1 = date_create("2007-03-24");
$date2 = date_create("2009-06-26");

$dateDifference = date_diff($date1, $date2)->format('%y years, %m months and %d days');

echo $dateDifference;

Output:

2 years, 3 months and 2 days

For more info read PHP date_diff manual

According to manual date_diff is an alias of DateTime::diff()

Rooseveltroost

I like to point out that date_diff can be provided a boolean true to return the difference in absolute. There is a chance you might get an inverted result with it. – Corson

Answer 12

Use example :

echo time_diff_string('2013-05-01 00:22:35', 'now');
echo time_diff_string('2013-05-01 00:22:35', 'now', true);

Output :

4 months ago
4 months, 2 weeks, 3 days, 1 hour, 49 minutes, 15 seconds ago

Function :

function time_diff_string($from, $to, $full = false) {
    $from = new DateTime($from);
    $to = new DateTime($to);
    $diff = $to->diff($from);

    $diff->w = floor($diff->d / 7);
    $diff->d -= $diff->w * 7;

    $string = array(
        'y' => 'year',
        'm' => 'month',
        'w' => 'week',
        'd' => 'day',
        'h' => 'hour',
        'i' => 'minute',
        's' => 'second',
    );
    foreach ($string as $k => &$v) {
        if ($diff->$k) {
            $v = $diff->$k . ' ' . $v . ($diff->$k > 1 ? 's' : '');
        } else {
            unset($string[$k]);
        }
    }

    if (!$full) $string = array_slice($string, 0, 1);
    return $string ? implode(', ', $string) . ' ago' : 'just now';
}

Pugh

if I want to determine if the difference is bigger then 30 minute, what should I do? – Ashleaashlee

@OfirAttia: you have a bunch of questions like that here on SO, just use search. Simple demo – Alexis

Answer 13

Try this very simple answer using date_diff(), this is tested.

$date1 = date_create("2017-11-27");
$date2 = date_create("2018-12-29");
$diff=date_diff($date1,$date2);
$months = $diff->format("%m months");
$years = $diff->format("%y years");
$days = $diff->format("%d days");

echo $years .' '.$months.' '.$days;

the output is:

1 years 1 months 2 days

Hedgcock

Answer 14

you can always use the following function that can return the age in years and months (ie. 1 Year 4 Months)

function getAge($dob, $age_at_date)
{  
    $d1 = new DateTime($dob);
    $d2 = new DateTime($age_at_date);
    $age = $d2->diff($d1);
    $years = $age->y;
    $months = $age->m;

    return $years.'.'.months;
}

or if you want the age to be calculated at the current date, you can use

function getAge($dob)
{  
    $d1 = new DateTime($dob);
    $d2 = new DateTime(date());
    $age = $d2->diff($d1);
    $years = $age->y;
    $months = $age->m;

    return $years.'.'.months;
}

Furore

Thank you! It looks simple. I used it as follows to get the total diff in months: $months = $age->y * 12 + $age->m; – Milli

Answer 15

For php version >=5.3 : Create two date objects and then use date_diff() function. It will return php DateInterval object. see documentation

$date1=date_create("2007-03-24");
$date2=date_create("2009-06-26");
$diff=date_diff($date1,$date2);
echo $diff->format("%R%a days");

Alpinist

Answer 16

You can use the

getdate()

function which returns an array containing all elements of the date/time supplied:

$diff = abs($endDate - $startDate);
$my_t=getdate($diff);
print("$my_t[year] years, $my_t[month] months and $my_t[mday] days");

If your start and end dates are in string format then use

$startDate = strtotime($startDateStr);
$endDate = strtotime($endDateStr);

before the above code

Vie

doesn't seem to work. I get a date at the begining of the timestamp era. – Amby

It is important to understand that you need to do a $my_t["year"] -= 1970 to get the correct number of years. You also need to subtract your hour difference from GMT to get the hours right. You need to subtract 1 from month and date as well. – Athalia

Answer 17

// If you just want to see the year difference then use this function.
// Using the logic I've created you may also create month and day difference
// which I did not provide here so you may have the efforts to use your brain.
// :)
$date1='2009-01-01';
$date2='2010-01-01';
echo getYearDifference ($date1,$date2);
function getYearDifference($date1=strtotime($date1),$date2=strtotime($date2)){
    $year = 0;
    while($date2 > $date1 = strtotime('+1 year', $date1)){
        ++$year;
    }
    return $year;
}

Kaduna

Does "strtotime('+1 year', $date1)" take leap years into account? – Kanter

Answer 18

I have some simple logic for that:

<?php
    per_days_diff('2011-12-12','2011-12-29')
    function per_days_diff($start_date, $end_date) {
        $per_days = 0;
        $noOfWeek = 0;
        $noOfWeekEnd = 0;
        $highSeason=array("7", "8");

        $current_date = strtotime($start_date);
        $current_date += (24 * 3600);
        $end_date = strtotime($end_date);

        $seassion = (in_array(date('m', $current_date), $highSeason))?"2":"1";

        $noOfdays = array('');

        while ($current_date <= $end_date) {
            if ($current_date <= $end_date) {
                $date = date('N', $current_date);
                array_push($noOfdays,$date);
                $current_date = strtotime('+1 day', $current_date);
            }
        }

        $finalDays = array_shift($noOfdays);
        //print_r($noOfdays);
        $weekFirst = array("week"=>array(),"weekEnd"=>array());
        for($i = 0; $i < count($noOfdays); $i++)
        {
            if ($noOfdays[$i] == 1)
            {
                //echo "This is week";
                //echo "<br/>";
                if($noOfdays[$i+6]==7)
                {
                    $noOfWeek++;
                    $i=$i+6;
                }
                else
                {
                    $per_days++;
                }
                //array_push($weekFirst["week"],$day);
            }
            else if($noOfdays[$i]==5)
            {
                //echo "This is weekend";
                //echo "<br/>";
                if($noOfdays[$i+2] ==7)
                {
                    $noOfWeekEnd++;
                    $i = $i+2;
                }
                else
                {
                    $per_days++;
                }
                //echo "After weekend value:- ".$i;
                //echo "<br/>";
            }
            else
            {
                $per_days++;
            }
        }

        /*echo $noOfWeek;
          echo "<br/>";
          echo $noOfWeekEnd;
          echo "<br/>";
          print_r($per_days);
          echo "<br/>";
          print_r($weekFirst);
        */

        $duration = array("weeks"=>$noOfWeek, "weekends"=>$noOfWeekEnd, "perDay"=>$per_days, "seassion"=>$seassion);
        return $duration;
      ?>

Ageold

There seems to be something missing at the end of the sample code (an ending brace and "?>" ?). – Kanter

"simple" logic. These are at least 40 lines of pure code. – Racing

Answer 19

This is my function. Required PHP >= 5.3.4. It use DateTime class. Very fast, quick and can do the difference between two dates or even the so called "time since".

if(function_exists('grk_Datetime_Since') === FALSE){
    function grk_Datetime_Since($From, $To='', $Prefix='', $Suffix=' ago', $Words=array()){
        #   Est-ce qu'on calcul jusqu'à un moment précis ? Probablement pas, on utilise maintenant
        if(empty($To) === TRUE){
            $To = time();
        }

        #   On va s'assurer que $From est numérique
        if(is_int($From) === FALSE){
            $From = strtotime($From);
        };

        #   On va s'assurer que $To est numérique
        if(is_int($To) === FALSE){
            $To = strtotime($To);
        }

        #   On a une erreur ?
        if($From === FALSE OR $From === -1 OR $To === FALSE OR $To === -1){
            return FALSE;
        }

        #   On va créer deux objets de date
        $From = new DateTime(@date('Y-m-d H:i:s', $From), new DateTimeZone('GMT'));
        $To   = new DateTime(@date('Y-m-d H:i:s', $To), new DateTimeZone('GMT'));

        #   On va calculer la différence entre $From et $To
        if(($Diff = $From->diff($To)) === FALSE){
            return FALSE;
        }

        #   On va merger le tableau des noms (par défaut, anglais)
        $Words = array_merge(array(
            'year'      => 'year',
            'years'     => 'years',
            'month'     => 'month',
            'months'    => 'months',
            'week'      => 'week',
            'weeks'     => 'weeks',
            'day'       => 'day',
            'days'      => 'days',
            'hour'      => 'hour',
            'hours'     => 'hours',
            'minute'    => 'minute',
            'minutes'   => 'minutes',
            'second'    => 'second',
            'seconds'   => 'seconds'
        ), $Words);

        #   On va créer la chaîne maintenant
        if($Diff->y > 1){
            $Text = $Diff->y.' '.$Words['years'];
        } elseif($Diff->y == 1){
            $Text = '1 '.$Words['year'];
        } elseif($Diff->m > 1){
            $Text = $Diff->m.' '.$Words['months'];
        } elseif($Diff->m == 1){
            $Text = '1 '.$Words['month'];
        } elseif($Diff->d > 7){
            $Text = ceil($Diff->d/7).' '.$Words['weeks'];
        } elseif($Diff->d == 7){
            $Text = '1 '.$Words['week'];
        } elseif($Diff->d > 1){
            $Text = $Diff->d.' '.$Words['days'];
        } elseif($Diff->d == 1){
            $Text = '1 '.$Words['day'];
        } elseif($Diff->h > 1){
            $Text = $Diff->h.' '.$Words['hours'];
        } elseif($Diff->h == 1){
            $Text = '1 '.$Words['hour'];
        } elseif($Diff->i > 1){
            $Text = $Diff->i.' '.$Words['minutes'];
        } elseif($Diff->i == 1){
            $Text = '1 '.$Words['minute'];
        } elseif($Diff->s > 1){
            $Text = $Diff->s.' '.$Words['seconds'];
        } else {
            $Text = '1 '.$Words['second'];
        }

        return $Prefix.$Text.$Suffix;
    }
}

Berry

Answer 20

An easy function

function time_difference($time_1, $time_2, $limit = null)
{

    $val_1 = new DateTime($time_1);
    $val_2 = new DateTime($time_2);

    $interval = $val_1->diff($val_2);

    $output = array(
        "year" => $interval->y,
        "month" => $interval->m,
        "day" => $interval->d,
        "hour" => $interval->h,
        "minute" => $interval->i,
        "second" => $interval->s
    );

    $return = "";
    foreach ($output AS $key => $value) {

        if ($value == 1)
            $return .= $value . " " . $key . " ";
        elseif ($value >= 1)
            $return .= $value . " " . $key . "s ";

        if ($key == $limit)
            return trim($return);
    }
    return trim($return);
}

Use like

echo time_difference ($time_1, $time_2, "day");

Will return like 2 years 8 months 2 days

Cantilever

Answer 21

This will try to detect whether a timestamp was given or not, and will also return future dates/times as negative values:

<?php

function time_diff($start, $end = NULL, $convert_to_timestamp = FALSE) {
  // If $convert_to_timestamp is not explicitly set to TRUE,
  // check to see if it was accidental:
  if ($convert_to_timestamp || !is_numeric($start)) {
    // If $convert_to_timestamp is TRUE, convert to timestamp:
    $timestamp_start = strtotime($start);
  }
  else {
    // Otherwise, leave it as a timestamp:
    $timestamp_start = $start;
  }
  // Same as above, but make sure $end has actually been overridden with a non-null,
  // non-empty, non-numeric value:
  if (!is_null($end) && (!empty($end) && !is_numeric($end))) {
    $timestamp_end = strtotime($end);
  }
  else {
    // If $end is NULL or empty and non-numeric value, assume the end time desired
    // is the current time (useful for age, etc):
    $timestamp_end = time();
  }
  // Regardless, set the start and end times to an integer:
  $start_time = (int) $timestamp_start;
  $end_time = (int) $timestamp_end;

  // Assign these values as the params for $then and $now:
  $start_time_var = 'start_time';
  $end_time_var = 'end_time';
  // Use this to determine if the output is positive (time passed) or negative (future):
  $pos_neg = 1;

  // If the end time is at a later time than the start time, do the opposite:
  if ($end_time <= $start_time) {
    $start_time_var = 'end_time';
    $end_time_var = 'start_time';
    $pos_neg = -1;
  }

  // Convert everything to the proper format, and do some math:
  $then = new DateTime(date('Y-m-d H:i:s', $$start_time_var));
  $now = new DateTime(date('Y-m-d H:i:s', $$end_time_var));

  $years_then = $then->format('Y');
  $years_now = $now->format('Y');
  $years = $years_now - $years_then;

  $months_then = $then->format('m');
  $months_now = $now->format('m');
  $months = $months_now - $months_then;

  $days_then = $then->format('d');
  $days_now = $now->format('d');
  $days = $days_now - $days_then;

  $hours_then = $then->format('H');
  $hours_now = $now->format('H');
  $hours = $hours_now - $hours_then;

  $minutes_then = $then->format('i');
  $minutes_now = $now->format('i');
  $minutes = $minutes_now - $minutes_then;

  $seconds_then = $then->format('s');
  $seconds_now = $now->format('s');
  $seconds = $seconds_now - $seconds_then;

  if ($seconds < 0) {
    $minutes -= 1;
    $seconds += 60;
  }
  if ($minutes < 0) {
    $hours -= 1;
    $minutes += 60;
  }
  if ($hours < 0) {
    $days -= 1;
    $hours += 24;
  }
  $months_last = $months_now - 1;
  if ($months_now == 1) {
    $years_now -= 1;
    $months_last = 12;
  }

  // "Thirty days hath September, April, June, and November" ;)
  if ($months_last == 9 || $months_last == 4 || $months_last == 6 || $months_last == 11) {
    $days_last_month = 30;
  }
  else if ($months_last == 2) {
    // Factor in leap years:
    if (($years_now % 4) == 0) {
      $days_last_month = 29;
    }
    else {
      $days_last_month = 28;
    }
  }
  else {
    $days_last_month = 31;
  }
  if ($days < 0) {
    $months -= 1;
    $days += $days_last_month;
  }
  if ($months < 0) {
    $years -= 1;
    $months += 12;
  }

  // Finally, multiply each value by either 1 (in which case it will stay the same),
  // or by -1 (in which case it will become negative, for future dates).
  // Note: 0 * 1 == 0 * -1 == 0
  $out = new stdClass;
  $out->years = (int) $years * $pos_neg;
  $out->months = (int) $months * $pos_neg;
  $out->days = (int) $days * $pos_neg;
  $out->hours = (int) $hours * $pos_neg;
  $out->minutes = (int) $minutes * $pos_neg;
  $out->seconds = (int) $seconds * $pos_neg;
  return $out;
}

Example usage:

<?php
  $birthday = 'June 2, 1971';
  $check_age_for_this_date = 'June 3, 1999 8:53pm';
  $age = time_diff($birthday, $check_age_for_this_date)->years;
  print $age;// 28

Or:

<?php
  $christmas_2020 = 'December 25, 2020';
  $countdown = time_diff($christmas_2020);
  print_r($countdown);

Cicisbeo

Answer 22

"if" the date is stored in MySQL, I find it easier to do the difference calculation at the database level... Then based on the Day, Hour, Min, Sec output, parse and display results as appropriate...

mysql> select firstName, convert_tz(loginDate, '+00:00', '-04:00') as loginDate, TIMESTAMPDIFF(DAY, loginDate, now()) as 'Day', TIMESTAMPDIFF(HOUR, loginDate, now())+4 as 'Hour', TIMESTAMPDIFF(MINUTE, loginDate, now())+(60*4) as 'Min', TIMESTAMPDIFF(SECOND, loginDate, now())+(60*60*4) as 'Sec' from User_ where userId != '10158' AND userId != '10198' group by emailAddress order by loginDate desc;
 +-----------+---------------------+------+------+------+--------+
 | firstName | loginDate           | Day  | Hour | Min  | Sec    |
 +-----------+---------------------+------+------+------+--------+
 | Peter     | 2014-03-30 18:54:40 |    0 |    4 |  244 |  14644 |
 | Keith     | 2014-03-30 18:54:11 |    0 |    4 |  244 |  14673 |
 | Andres    | 2014-03-28 09:20:10 |    2 |   61 | 3698 | 221914 |
 | Nadeem    | 2014-03-26 09:33:43 |    4 |  109 | 6565 | 393901 |
 +-----------+---------------------+------+------+------+--------+
 4 rows in set (0.00 sec)

Nidify

Answer 23

You can also use following code to return date diff by round fractions up $date1 = $duedate; // assign due date echo $date2 = date("Y-m-d"); // current date $ts1 = strtotime($date1); $ts2 = strtotime($date2); $seconds_diff = $ts1 - $ts2; echo $datediff = ceil(($seconds_diff/3600)/24); // return in days

If you use floor method of php instead of ceil it will return you the round fraction down. Please check the difference here, some times if your staging servers timezone is different then the live site time zone in that case you may get different results so change the conditions accordingly.

Mweru

Answer 24

$date1 = date_create('2007-03-24');
$date2 = date_create('2009-06-26');
$interval = date_diff($date1, $date2);
echo "difference : " . $interval->y . " years, " . $interval->m." months, ".$interval->d." days ";

Memoried

Answer 25

Some time ago I wrote a format_date function as this gives many options on how you want your date:

function format_date($date, $type, $seperator="-")
{
    if($date)
    {
        $day = date("j", strtotime($date));
        $month = date("n", strtotime($date));
        $year = date("Y", strtotime($date));
        $hour = date("H", strtotime($date));
        $min = date("i", strtotime($date));
        $sec = date("s", strtotime($date));

        switch($type)
        {
            case 0:  $date = date("Y".$seperator."m".$seperator."d",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 1:  $date = date("D, F j, Y",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 2:  $date = date("d".$seperator."m".$seperator."Y",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 3:  $date = date("d".$seperator."M".$seperator."Y",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 4:  $date = date("d".$seperator."M".$seperator."Y h:i A",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 5:  $date = date("m".$seperator."d".$seperator."Y",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 6:  $date = date("M",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 7:  $date = date("Y",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 8:  $date = date("j",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 9:  $date = date("n",mktime($hour, $min, $sec, $month, $day, $year)); break;
            case 10: 
                     $diff = abs(strtotime($date) - strtotime(date("Y-m-d h:i:s"))); 
                     $years = floor($diff / (365*60*60*24));
                     $months = floor(($diff - $years * 365*60*60*24) / (30*60*60*24));
                     $days = floor(($diff - $years * 365*60*60*24 - $months*30*60*60*24)/ (60*60*24));
                     $date = $years . " years, " . $months . " months, " . $days . "days";
        }
    }
    return($date);
}    

Pave

This answer is just as wrong as khaldonno's answer. It assumes (case 10) that a year has 365 days (every fourth year has 366 days (except for the 100 year / 400 years rules for the Gregorian calendar)), and that a month has 30 days (it is about approximately 30.42 days in non-leap years). Even with better constants it is only correct on average, not necessarily correct for any two particular dates. – Kanter

Answer 26

I had the same problem with PHP 5.2 and solved it with MySQL. Might not be exactly what you're looking for, but this will do the trick and return the number of days:

$datediff_q = $dbh->prepare("SELECT DATEDIFF(:date2, :date1)");
$datediff_q->bindValue(':date1', '2007-03-24', PDO::PARAM_STR);
$datediff_q->bindValue(':date2', '2009-06-26', PDO::PARAM_STR);
$datediff = ($datediff_q->execute()) ? $datediff_q->fetchColumn(0) : false;

More info here http://dev.mysql.com/doc/refman/5.5/en/date-and-time-functions.html#function_datediff

Sandstrom

Answer 27

Since everyone is posting code samples, here is another version.

I wanted a function to display differences from seconds to years (just one unit). For periods over 1 day, I wanted it to rollover at midnight (10am Monday seen from 9am Wednesday is 2 days ago, not 1). And for periods over a month, I wanted the rollover to be on the same day of the month (including for 30/31 day months & leap years).

This is what I came up with:

/**
 * Returns how long ago something happened in the past, showing it
 * as n seconds / minutes / hours / days / weeks / months / years ago.
 *
 * For periods over a day, it rolls over at midnight (so doesn't depend
 * on current time of day), and it correctly accounts for month-lengths
 * and leap-years (months and years rollover on current day of month).
 *
 * $param string $timestamp in DateTime format
 * $return string description of interval
 */
function ago($timestamp)
{
    $then = date_create($timestamp);

    // for anything over 1 day, make it rollover on midnight
    $today = date_create('tomorrow'); // ie end of today
    $diff = date_diff($then, $today);

    if ($diff->y > 0) return $diff->y.' year'.($diff->y>1?'s':'').' ago';
    if ($diff->m > 0) return $diff->m.' month'.($diff->m>1?'s':'').' ago';
    $diffW = floor($diff->d / 7);
    if ($diffW > 0) return $diffW.' week'.($diffW>1?'s':'').' ago';
    if ($diff->d > 1) return $diff->d.' day'.($diff->d>1?'s':'').' ago';

    // for anything less than 1 day, base it off 'now'
    $now = date_create();
    $diff = date_diff($then, $now);

    if ($diff->d > 0) return 'yesterday';
    if ($diff->h > 0) return $diff->h.' hour'.($diff->h>1?'s':'').' ago';
    if ($diff->i > 0) return $diff->i.' minute'.($diff->i>1?'s':'').' ago';
    return $diff->s.' second'.($diff->s==1?'':'s').' ago';
}

Carrnan

Answer 28

Very simple:

    <?php
        $date1 = date_create("2007-03-24");
        echo "Start date: ".$date1->format("Y-m-d")."<br>";
        $date2 = date_create("2009-06-26");
        echo "End date: ".$date2->format("Y-m-d")."<br>";
        $diff = date_diff($date1,$date2);
        echo "Difference between start date and end date: ".$diff->format("%y years, %m months and %d days")."<br>";
    ?>

Please checkout the following link for details:

PHP: date_diff - Manual

Note that it's for PHP 5.3.0 or greater.

Ardy

Answer 29

In for a penny, in for a pound: I have just reviewed several solutions, all providing a complex solution using floor() that then rounds up to a 26 years 12 month and 2 days solution, for what should have been 25 years, 11 months and 20 days!!!!

here is my version of this problem: may not be elegant, may not be well coded, but provides a more closer proximity to a answer if you do not count LEAP years, obviously leap years could be coded into this, but in this case - as someone else said, perhaps you could provide this answer:: I have included all TEST conditions and print_r so that you can see more clearly the construct of the results:: here goes,

// set your input dates/ variables::

$ISOstartDate   = "1987-06-22";
$ISOtodaysDate = "2013-06-22";

// We need to EXPLODE the ISO yyyy-mm-dd format into yyyy mm dd, as follows::

$yDate[ ] = explode('-', $ISOstartDate); print_r ($yDate);

$zDate[ ] = explode('-', $ISOtodaysDate); print_r ($zDate);

// Lets Sort of the Years!
// Lets Sort out the difference in YEARS between startDate and todaysDate ::
$years = $zDate[0][0] - $yDate[0][0];

// We need to collaborate if the month = month = 0, is before or after the Years Anniversary ie 11 months 22 days or 0 months 10 days...
if ($months == 0 and $zDate[0][1] > $ydate[0][1]) {
    $years = $years -1;
}
// TEST result
echo "\nCurrent years => ".$years;

// Lets Sort out the difference in MONTHS between startDate and todaysDate ::
$months = $zDate[0][1] - $yDate[0][1];

// TEST result
echo "\nCurrent months => ".$months;

// Now how many DAYS has there been - this assumes that there is NO LEAP years, so the calculation is APPROXIMATE not 100%
// Lets cross reference the startDates Month = how many days are there in each month IF m-m = 0 which is a years anniversary
// We will use a switch to check the number of days between each month so we can calculate days before and after the years anniversary

switch ($yDate[0][1]){
    case 01:    $monthDays = '31';  break;  // Jan
    case 02:    $monthDays = '28';  break;  // Feb
    case 03:    $monthDays = '31';  break;  // Mar
    case 04:    $monthDays = '30';  break;  // Apr
    case 05:    $monthDays = '31';  break;  // May
    case 06:    $monthDays = '30';  break;  // Jun
    case 07:    $monthDays = '31';  break;  // Jul
    case 08:    $monthDays = '31';  break;  // Aug
    case 09:    $monthDays = '30';  break;  // Sept
    case 10:    $monthDays = '31';  break;  // Oct
    case 11:    $monthDays = '30';  break;  // Nov
    case 12:    $monthDays = '31';  break;  // Dec
};
// TEST return
echo "\nDays in start month ".$yDate[0][1]." => ".$monthDays;


// Lets correct the problem with 0 Months - is it 11 months + days, or 0 months +days???

$days = $zDate[0][2] - $yDate[0][2] +$monthDays;
echo "\nCurrent days => ".$days."\n";

// Lets now Correct the months to being either 11 or 0 Months, depending upon being + or - the years Anniversary date 
// At the same time build in error correction for Anniversary dates not being 1yr 0m 31d... see if ($days == $monthDays )
if($days < $monthDays && $months == 0)
    {
    $months = 11;       // If Before the years anniversary date
    }
else    {
    $months = 0;        // If After the years anniversary date
    $years = $years+1;  // Add +1 to year
    $days = $days-$monthDays;   // Need to correct days to how many days after anniversary date
    };
// Day correction for Anniversary dates
if ($days == $monthDays )   // if todays date = the Anniversary DATE! set days to ZERO
    {
    $days = 0;          // days set toZERO so 1 years 0 months 0 days
    };

    echo "\nTherefore, the number of years/ months/ days/ \nbetween start and todays date::\n\n";

    printf("%d years, %d months, %d days\n", $years, $months, $days);

the end result is:: 26 years, 0 months, 0 days

That's how long I have been in business for on the 22nd June 2013 - Ouch!

Pincas

Answer 30

I'm using the following function which I wrote, when PHP 5.3 (respectively date_diff()) is not available:

        function dateDifference($startDate, $endDate)
        {
            $startDate = strtotime($startDate);
            $endDate = strtotime($endDate);
            if ($startDate === false || $startDate < 0 || $endDate === false || $endDate < 0 || $startDate > $endDate)
                return false;

            $years = date('Y', $endDate) - date('Y', $startDate);

            $endMonth = date('m', $endDate);
            $startMonth = date('m', $startDate);

            // Calculate months
            $months = $endMonth - $startMonth;
            if ($months <= 0)  {
                $months += 12;
                $years--;
            }
            if ($years < 0)
                return false;

            // Calculate the days
            $measure = ($months == 1) ? 'month' : 'months';
            $days = $endDate - strtotime('+' . $months . ' ' . $measure, $startDate);
            $days = date('z', $days);   

            return array($years, $months, $days);
        }

Metsky

Answer 31

DateInterval is great but it has a couple of caveats:

1. only for PHP 5.3+ (but that's really not a good excuse anymore)
2. only supports years, months, days, hours, minutes and seconds (no weeks)
3. it calculates the difference with all of the above + days (you can't get the difference in months only)

To overcome that, I coded the following (improved from @enobrev answer):

function date_dif($since, $until, $keys = 'year|month|week|day|hour|minute|second')
{
    $date = array_map('strtotime', array($since, $until));

    if ((count($date = array_filter($date, 'is_int')) == 2) && (sort($date) === true))
    {
        $result = array_fill_keys(explode('|', $keys), 0);

        foreach (preg_grep('~^(?:year|month)~i', $result) as $key => $value)
        {
            while ($date[1] >= strtotime(sprintf('+%u %s', $value + 1, $key), $date[0]))
            {
                ++$value;
            }

            $date[0] = strtotime(sprintf('+%u %s', $result[$key] = $value, $key), $date[0]);
        }

        foreach (preg_grep('~^(?:year|month)~i', $result, PREG_GREP_INVERT) as $key => $value)
        {
            if (($value = intval(abs($date[0] - $date[1]) / strtotime(sprintf('%u %s', 1, $key), 0))) > 0)
            {
                $date[0] = strtotime(sprintf('+%u %s', $result[$key] = $value, $key), $date[0]);
            }
        }

        return $result;
    }

    return false;
}

It runs two loops; the first one deals with the relative intervals (years and months) via brute-forcing, and the second one computes the additional absolute intervals with simple arithmetic (so it's faster):

echo humanize(date_dif('2007-03-24', '2009-07-31', 'second')); // 74300400 seconds
echo humanize(date_dif('2007-03-24', '2009-07-31', 'minute|second')); // 1238400 minutes, 0 seconds
echo humanize(date_dif('2007-03-24', '2009-07-31', 'hour|minute|second')); // 20640 hours, 0 minutes, 0 seconds
echo humanize(date_dif('2007-03-24', '2009-07-31', 'year|day')); // 2 years, 129 days
echo humanize(date_dif('2007-03-24', '2009-07-31', 'year|week')); // 2 years, 18 weeks
echo humanize(date_dif('2007-03-24', '2009-07-31', 'year|week|day')); // 2 years, 18 weeks, 3 days
echo humanize(date_dif('2007-03-24', '2009-07-31')); // 2 years, 4 months, 1 week, 0 days, 0 hours, 0 minutes, 0 seconds

function humanize($array)
{
    $result = array();

    foreach ($array as $key => $value)
    {
        $result[$key] = $value . ' ' . $key;

        if ($value != 1)
        {
            $result[$key] .= 's';
        }
    }

    return implode(', ', $result);
}

Malayalam

@PeterMortensen: It should work, but I make no guarantees. Set your timezone and give it a go. – Malayalam

Answer 32

$date = '2012.11.13';
$dateOfReturn = '2017.10.31';

$substract = str_replace('.', '-', $date);

$substract2 = str_replace('.', '-', $dateOfReturn);



$date1 = $substract;
$date2 = $substract2;

$ts1 = strtotime($date1);
$ts2 = strtotime($date2);

$year1 = date('Y', $ts1);
$year2 = date('Y', $ts2);

$month1 = date('m', $ts1);
$month2 = date('m', $ts2);

echo $diff = (($year2 - $year1) * 12) + ($month2 - $month1);

Amphioxus

Answer 33

function showTime($time){

    $start      = strtotime($time);
    $end        = strtotime(date("Y-m-d H:i:s"));
    $minutes    = ($end - $start)/60;


    // years 
    if(($minutes / (60*24*365)) > 1){
        $years = floor($minutes/(60*24*365));
        return "From $years year( s ) ago";
    }


    // monthes 
    if(($minutes / (60*24*30)) > 1){
        $monthes = floor($minutes/(60*24*30));
        return "From $monthes monthe( s ) ago";
    }


    // days 
    if(($minutes / (60*24)) > 1){
        $days = floor($minutes/(60*24));
        return "From $days day( s ) ago";
    }

    // hours 
    if(($minutes / 60) > 1){
        $hours = floor($minutes/60);
        return "From $hours hour( s ) ago";
    }

    // minutes 
    if($minutes > 1){
        $minutes = floor($minutes);
        return "From $minutes minute( s ) ago";
    }
}

echo showTime('2022-05-05 21:33:00');

Xerophyte