I have been fighting with a very weird bug for almost a month. Asking you guys is my last hope. I wrote a program in C that integrates the 2d Cahn–Hilliard equation using the Implicit Euler (IE) scheme in Fourier (or reciprocal) space:
Where the "hats" mean that we are in Fourier space: h_q(t_n+1) and h_q(t_n) are the FTs of h(x,y) at times t_n and t_(n+1), N[h_q] is the nonlinear operator applied to h_q, in Fourier space, and L_q is the linear one, again in Fourier space. I don't want to go too much into the details of the numerical method I am using, since I am sure that the problem is not coming from there (I tried using other schemes).
My code is actually quite simple. Here is the beginning, where basically I declare variables, allocate memory and create the plans for the FFTW routines.
# include <stdlib.h>
# include <stdio.h>
# include <time.h>
# include <math.h>
# include <fftw3.h>
# define pi M_PI
int main(){
// define lattice size and spacing
int Nx = 150; // n of points on x
int Ny = 150; // n of points on y
double dx = 0.5; // bin size on x and y
// define simulation time and time step
long int Nt = 1000; // n of time steps
double dt = 0.5; // time step size
// number of frames to plot (at denominator)
long int nframes = Nt/100;
// define the noise
double rn, drift = 0.05; // punctual drift of h(x)
srand(666); // seed the RNG
// other variables
int i, j, nt; // variables for space and time loops
// declare FFTW3 routine
fftw_plan FT_h_hft; // routine to perform fourier transform
fftw_plan FT_Nonl_Nonlft;
fftw_plan IFT_hft_h; // routine to perform inverse fourier transform
// declare and allocate memory for real variables
double *Linft = fftw_alloc_real(Nx*Ny);
double *Q2 = fftw_alloc_real(Nx*Ny);
double *qx = fftw_alloc_real(Nx);
double *qy = fftw_alloc_real(Ny);
// declare and allocate memory for complex variables
fftw_complex *dh = fftw_alloc_complex(Nx*Ny);
fftw_complex *dhft = fftw_alloc_complex(Nx*Ny);
fftw_complex *Nonl = fftw_alloc_complex(Nx*Ny);
fftw_complex *Nonlft = fftw_alloc_complex(Nx*Ny);
// create the FFTW plans
FT_h_hft = fftw_plan_dft_2d ( Nx, Ny, dh, dhft, FFTW_FORWARD, FFTW_ESTIMATE );
FT_Nonl_Nonlft = fftw_plan_dft_2d ( Nx, Ny, Nonl, Nonlft, FFTW_FORWARD, FFTW_ESTIMATE );
IFT_hft_h = fftw_plan_dft_2d ( Nx, Ny, dhft, dh, FFTW_BACKWARD, FFTW_ESTIMATE );
// open file to store the data
char acstr[160];
FILE *fp;
sprintf(acstr, "CH2d_IE_dt%.2f_dx%.3f_Nt%ld_Nx%d_Ny%d_#f%.ld.dat",dt,dx,Nt,Nx,Ny,Nt/nframes);
After this preamble, I initialise my function h(x,y) with a uniform random noise, and I also take the FT of it. I set the imaginary part of h(x,y), which is dh[i*Ny+j][1] in the code, to 0, since it is a real function. Then I calculate the wavevectors qx and qy, and with them, I compute the linear operator of my equation in Fourier space, which is Linft in the code. I consider only the - fourth derivative of h as the linear term, so that the FT of the linear term is simply -q^4... but again, I don't want to go into the details of my integration method. The question is not about it.
// generate h(x,y) at initial time
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
rn = (double) rand()/RAND_MAX; // extract a random number between 0 and 1
dh[i*Ny+j][0] = drift-2.0*drift*rn; // shift of +-drift
dh[i*Ny+j][1] = 0.0;
}
}
// execute plan for the first time
fftw_execute (FT_h_hft);
// calculate wavenumbers
for (i = 0; i < Nx; i++) { qx[i] = 2.0*i*pi/(Nx*dx); }
for (i = 0; i < Ny; i++) { qy[i] = 2.0*i*pi/(Ny*dx); }
for (i = 1; i < Nx/2; i++) { qx[Nx-i] = -qx[i]; }
for (i = 1; i < Ny/2; i++) { qy[Ny-i] = -qy[i]; }
// calculate the FT of the linear operator
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
Q2[i*Ny+j] = qx[i]*qx[i] + qy[j]*qy[j];
Linft[i*Ny+j] = -Q2[i*Ny+j]*Q2[i*Ny+j];
}
}
Then, finally, it comes the time loop. Essentially, what I do is the following:
Every once in a while, I save the data to a file and print some information on the terminal. In particular, I print the highest value of the FT of the Nonlinear term. I also check if h(x,y) is diverging to infinity (it shouldn't happen!),
Calculate h^3 in direct space (that is simply
dh[i*Ny+j][0]*dh[i*Ny+j][0]*dh[i*Ny+j][0]). Again, the imaginary part is set to 0,Take the FT of h^3,
Obtain the complete Nonlinear term in reciprocal space (that is N[h_q] in the IE algorithm written above) by computing -q^2*(FT[h^3] - FT[h]). In the code, I am referring to the lines
Nonlft[i*Ny+j][0] = -Q2[i*Ny+j]*(Nonlft[i*Ny+j][0] -dhft[i*Ny+j][0])and the one below, for the imaginary part. I do this because:
- Advance in time using the IE method, transform back in direct space, and then normalise.
Here is the code:
for(nt = 0; nt < Nt; nt++) {
if((nt % nframes)== 0) {
printf("%.0f %%\n",((double)nt/(double)Nt)*100);
printf("Nonlft %.15f \n",Nonlft[(Nx/2)*(Ny/2)][0]);
// write data to file
fp = fopen(acstr,"a");
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
fprintf(fp, "%4d %4d %.6f\n", i, j, dh[i*Ny+j][0]);
}
}
fclose(fp);
}
// check if h is going to infinity
if (isnan(dh[1][0])!=0) {
printf("crashed!\n");
return 0;
}
// calculate nonlinear term h^3 in direct space
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
Nonl[i*Ny+j][0] = dh[i*Ny+j][0]*dh[i*Ny+j][0]*dh[i*Ny+j][0];
Nonl[i*Ny+j][1] = 0.0;
}
}
// Fourier transform of nonlinear term
fftw_execute (FT_Nonl_Nonlft);
// second derivative in Fourier space is just multiplication by -q^2
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
Nonlft[i*Ny+j][0] = -Q2[i*Ny+j]*(Nonlft[i*Ny+j][0] -dhft[i*Ny+j][0]);
Nonlft[i*Ny+j][1] = -Q2[i*Ny+j]*(Nonlft[i*Ny+j][1] -dhft[i*Ny+j][1]);
}
}
// Implicit Euler scheme in Fourier space
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
dhft[i*Ny+j][0] = (dhft[i*Ny+j][0] + dt*Nonlft[i*Ny+j][0])/(1.0 - dt*Linft[i*Ny+j]);
dhft[i*Ny+j][1] = (dhft[i*Ny+j][1] + dt*Nonlft[i*Ny+j][1])/(1.0 - dt*Linft[i*Ny+j]);
}
}
// transform h back in direct space
fftw_execute (IFT_hft_h);
// normalize
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
dh[i*Ny+j][0] = dh[i*Ny+j][0] / (double) (Nx*Ny);
dh[i*Ny+j][1] = dh[i*Ny+j][1] / (double) (Nx*Ny);
}
}
}
Last part of the code: empty the memory and destroy FFTW plans.
// terminate the FFTW3 plan and free memory
fftw_destroy_plan (FT_h_hft);
fftw_destroy_plan (FT_Nonl_Nonlft);
fftw_destroy_plan (IFT_hft_h);
fftw_cleanup();
fftw_free(dh);
fftw_free(Nonl);
fftw_free(qx);
fftw_free(qy);
fftw_free(Q2);
fftw_free(Linft);
fftw_free(dhft);
fftw_free(Nonlft);
return 0;
}
If I run this code, I obtain the following output:
0 %
Nonlft 0.0000000000000000000
1 %
Nonlft -0.0000000000001353512
2 %
Nonlft -0.0000000000000115539
3 %
Nonlft 0.0000000001376379599
...
69 %
Nonlft -12.1987455309071730625
70 %
Nonlft -70.1631962517720353389
71 %
Nonlft -252.4941743351609204637
72 %
Nonlft 347.5067875825179726235
73 %
Nonlft 109.3351142318568633982
74 %
Nonlft 39933.1054502610786585137
crashed!
The code crashes before reaching the end and we can see that the Nonlinear term is diverging.
Now, the thing that doesn't make sense to me is that if I change the lines in which I calculate the FT of the Nonlinear term in the following way:
// calculate nonlinear term h^3 -h in direct space
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
Nonl[i*Ny+j][0] = dh[i*Ny+j][0]*dh[i*Ny+j][0]*dh[i*Ny+j][0] -dh[i*Ny+j][0];
Nonl[i*Ny+j][1] = 0.0;
}
}
// Fourier transform of nonlinear term
fftw_execute (FT_Nonl_Nonlft);
// second derivative in Fourier space is just multiplication by -q^2
for ( i = 0; i < Nx; i++ ) {
for ( j = 0; j < Ny; j++ ) {
Nonlft[i*Ny+j][0] = -Q2[i*Ny+j]* Nonlft[i*Ny+j][0];
Nonlft[i*Ny+j][1] = -Q2[i*Ny+j]* Nonlft[i*Ny+j][1];
}
}
Which means that I am using this definition:
instead of this one:
Then the code is perfectly stable and no divergence happens! Even for billions of time steps! Why does this happen, since the two ways of calculating Nonlft should be equivalent?
Thank you very much to anyone who will take the time to read all of this and give me some help!
EDIT: To make things even more weird, I should point out that this bug does NOT happen for the same system in 1D. In 1D both methods of calculating Nonlft are stable.
EDIT: I add a short animation of what happens to the function h(x,y) just before crashing. Also: I quickly re-wrote the code in MATLAB, which uses Fast Fourier Transform functions based on the FFTW library, and the bug is NOT happening... the mystery deepens.
