How to find out if SCSI device (say /etc/sda) is a disk or not via ioctl calls or other?

Question

How to find out if SCSI device (say /dev/sda) is a disk or not via ioctl calls or other ? I have tried the following but the ioctl call fails. My /dev/sda is a USB flash disk.

#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <fcntl.h>
#include <errno.h>
#include <scsi/scsi.h>
#include <scsi/sg.h>
#include <sys/ioctl.h>

int main(int argc, char** argv) {
    char *dev = "/dev/sda";
    struct sg_scsi_id m_id;
    int rc;
    int fd;

    fd = open(dev, O_RDONLY | O_NONBLOCK);
    if (fd < 0) {
        perror(dev);
    }
    memset(&m_id, 0, sizeof (m_id));
    rc = ioctl(fd, SG_GET_SCSI_ID, &m_id);
    if (rc < 0) {
        close(fd);
        printf("FAIL: ioctl SG_GET_SCSI_ID, rc=%d, errno=%d\n", rc, errno);
    } else {
        if (m_id.scsi_type == TYPE_DISK || m_id.scsi_type == 14) {
            printf("OK: is disk\n");
        } else {
            printf("OK: is NOT disk\n");
        }
    }
    close(fd);
    return (EXIT_SUCCESS);
}
// result is: FAIL: ioctl SG_GET_SCSI_ID, rc=-1, errno=22

One

Answer 1

I have solved this using SG_IO and interpreting the binary data directly according to the specification of the INQUIRY command (field: peripheral device type) and interpreting them according to SCSI Peripheral Device Types (is disk if per. dev. type is either 00h or 0Eh)

int is_disk_sd(char *dev) {
    unsigned char sense[32];
    struct sg_io_hdr io_hdr;
    char scsi_data[SCSI_LEN];
    struct hd_geometry geo;
    // request for "standard inquiry data"
    unsigned char inq_cmd[] = {INQUIRY, 0, 0, 0, SCSI_LEN, 0};
    int fd;

    fd = open(dev, O_RDONLY | O_NONBLOCK);
    if (fd < 0) {
        perror(dev);
    }

    memset(&io_hdr, 0, sizeof (io_hdr));
    io_hdr.interface_id = 'S';
    io_hdr.cmdp = inq_cmd;
    io_hdr.cmd_len = sizeof (inq_cmd);
    io_hdr.dxferp = scsi_data;
    io_hdr.dxfer_len = sizeof (scsi_data);
    io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
    io_hdr.sbp = sense;
    io_hdr.mx_sb_len = sizeof (sense);
    io_hdr.timeout = 5000;

    if (ioctl(fd, SG_IO, &io_hdr) < 0) {
        close(fd);
        return 0;
    } else {
        close(fd);
        if (scsi_data[1] & 0x80) {
            return 0; // support is removable
        }
        if ((scsi_data[0] & 0x1f) || ((scsi_data[0] & 0x1f) != 0xe)) { // 0 or 14 (00h or 0Eh)
            return 0; // not direct access neither simplified direct access device
        }
        return 1;
    }
}

One

Answer 2

Maybe you can get useful information from /sys/bus/scsi/devices/*/ filesystem.

Forebode

ty, it does help, i'll dig some more to do it via ioctl tough. [root@localhost ~]# cat /proc/scsi/scsi Attached devices: Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: SanDisk Model: Cruzer Rev: 8.01 Type: Direct-Access ANSI SCSI revision: 02 – One

Answer 3

HDIO_GET_IDENTITY seems to work for me on disks but not on flash drives. I think this is what hdparm -i uses.

Omeromero

It works on a SATA disk using libata to appear as /dev/sda. I don't have a SCSI disk around to check. – Omeromero