Air200 GSM module have problem with AT commands, Why?
Asked Answered
U

1

0

I bought an air200 gsm module and this module won't work properly. in one hand i use the standard at command for sending Unicode SMS, but cant sends Unicode. from the other hand when I send text SMS, for every SMS I send the network less my credit double cost. anybody can please help to solve the problem?


  1. I send the following command for sending SMS:

    AT+CMGF=1

    AT+CSMP=17,11,0,0

    AT+CSCS="GSM"

    AT+CMGS="number come here"

    SMS body

    // Ctrl+Z to send SMS

in this case, I can send SMS message but however, I send just one SMS it decreases my credit double time.


  1. I use the following command to send Unicode SMS but it gets the error:

    AT+CMGF=0

    AT+CSCS="UCS2"

    AT+CSMP=49,167,0,8

    AT+CMGS="number come here"

    d8b3d984d8a7d985

    // Ctrl+Z to send SMS

everything goes OK until I send AT+CMGS="number" and it response ERROR.
anybody please can get an idea? whats happen exactly? I send at command under raspbian Linux on the raspberry pi.

Undertone answered 15/12, 2018 at 6:36 Comment(0)
D
1

AT+CMGS="number come here"

I suspect that you have not UCS2 encoded the phone number. Notice that after you run AT+CSCS="UCS2" every single string must be encoded that way, so for instance to switch from UCS2 to UTF-8 would be AT+CSCS="005500540046002D0038".

Deuteronomy answered 16/12, 2018 at 22:45 Comment(0)

© 2022 - 2024 — McMap. All rights reserved.