Set processor affinity for MATLAB engine (Windows 7)
Asked Answered
K

3

7

I'm developing an application in c++. One of the components of the application uses Matlab (via the Matlab engine) for data processing. At the same time, a data acquisition system is streaming data to disk. Occasionally, during periods of intensive Matlab processing, the acquisition system crashes. By setting the processor affinity of Matlab to a subset of available processors, this problem is resolved. However, as the application is launched a few times daily, and on multiple machines, manually setting the affinity each time is inconvenient. The trick of setting processor affinity via the command-line of a shortcut doesn't work, since the engine is launched from within my application, not via a shortcut. I've been searching for a way to programatically set the affinity, but with limited success.

I've considered the following options (ranked in order of preference):

  1. Specify processor affinity for the matlab engine from within the application, when the engine is launched.
  2. Specify a default processor affinity for the matlab engine, separately from the full Matlab application itself.
  3. As a last resort, set a default affinity for Matlab (both engine and non-engine uses). This is the least desirable, since Matlab is used for other purposes on the deployment machines, and it would be preferable to not limit it for other usages.

Is it possible to set the processor affinity from within my application, and if so, how? If not, what is the right way to tackle this problem? Any advice on these options, or other suggestions/solutions, will be welcome.

Kid answered 19/3, 2012 at 21:32 Comment(0)
C
6

Sounds like you're on Windows. You can call .NET directly from Matlab to manipulate the processor affinity mask, and avoid having to build a MEX file. The System.Diagnostics.Process class has controls for processor affinity, as described in this solution. Here's a Matlab function that uses it. Run it in the Matlab engine first thing after launching it.

function twiddle_processor_affinity()
proc = System.Diagnostics.Process.GetCurrentProcess();
aff = proc.ProcessorAffinity.ToInt32;  % get current affinity mask
fprintf('Current affinity mask: %s\n', dec2bin(aff, 8));
proc.ProcessorAffinity = System.IntPtr(int32(2)); % set affinity mask
fprintf('Adjusted affinity to: %s\n', dec2bin(proc.ProcessorAffinity.ToInt32, 8));

Since Matlab exposes the .NET standard library objects on Windows, you can sometimes search for questions like this under C# or .NET and port the answer directly over to Matlab.

Coze answered 20/3, 2012 at 14:29 Comment(0)
G
4

I haven't tried this solution but it seems like it should work. Create a simple mex function that does the following:

  1. Call GetCurrentProcess to retrieve a handle to the MATLAB process
  2. Set the appropriate affinity mask for this process using SetProcessAffinityMask

Now, when your application launches, just call this mex function as you would a regular MATLAB function (the mex function must be visible on the MATLAB path) and it should set processor affinity as you desire. You could even pass the affinity mask as an input to the function to make it more versatile.

Grassofparnassus answered 19/3, 2012 at 21:58 Comment(0)
A
0

Below is an implementation of the MEX function that @Praetorian described (shows how to use the SetProcessAffinityMask function):

set_affinity.c

#include "mex.h"
#include <windows.h>

void mexFunction(int nlhs, mxArray* plhs[], int nrhs, const mxArray* prhs[])
{
    HANDLE hProc;
    DWORD_PTR dwAffinityMask;
    unsigned int numCores;

    // check arguments
    if (nlhs > 0 || nrhs != 1) {
        mexErrMsgIdAndTxt("mex:error", "Wrong number of arguments.");
    }
    if (!mxIsDouble(prhs[0]) || mxGetNumberOfElements(prhs[0])!=1) {
        mexErrMsgIdAndTxt("mex:error", "Expecting a scalar number.");
    }

    // number of logical processors
    numCores = (unsigned int) mxGetScalar(prhs[0]);

    // set affinity of current process to use all cores
    hProc = GetCurrentProcess();
    dwAffinityMask = (1 << numCores) - 1;
    if (!SetProcessAffinityMask(hProc, dwAffinityMask)) {
        mexErrMsgIdAndTxt("mex:error", "WinAPI error code: %lu", GetLastError());
    }
}

Example:

On my quad-core hyper-threaded machine, I would invoke the MEX-function as following to allow MATLAB to execute on all 8 logical processors:

>> getenv('NUMBER_OF_PROCESSORS')
ans =
8

>> mex -largeArrayDims set_affinity.c
>> set_affinity(8)

To use only half the number of processors:

>> set_affinity(4)

Note the following remark in the MSDN doc page:

Process affinity is inherited by any child process or newly instantiated local process.

Do not call SetProcessAffinityMask in a DLL that may be called by processes other than your own.

So messing with the affinity will affect all computations initiated by MATLAB and its dependent libraries. Here is a post by Raymond Chen on the topic.

Apoplexy answered 18/6, 2014 at 16:15 Comment(0)

© 2022 - 2024 — McMap. All rights reserved.