Several problems above.
- Don't use
ME in C#, it is this. Me is VB. The code above would not compile, as written, if using C#, since you left out your User() class you define as ME. I am not sure why you think you need that, since all it seems to hold is UserIP and UserName. The IP is part of a Socket, so you should just use that if you ever needed it:
IPAddress ip = IPAddress.Parse(socket.RemoteEndPoint);
And UserName could be made a global string variable - doesn't have to be part of a class.
Maybe I'm being nitpicky, but I didn't see where it was required to have either of those variables in the User() object like that and just mucked things up, for me, trying to decipher the code.
- Always define your
Socket, connect to it, then do your .Send(). You are missing the first 2 steps in your button click - you just do your .Send(). UdpClient is not a Socket, and I think it's better to do this as a Socket and define your connection type later. I think you could be right that you are trying to do your .Send() using the UdpClient you defined as your listener. Don't use the same object for your send and your listening! Normally you would, but you have 2 different addresses and ports for each event.
Don't use a foreach in your CreateUDPClient() function to get your IPAddress to assign to your IPEndPoint. You already knew your IP. Assign it directly. It's wasting processing time.
IPAddress ip = IPAddress.Parse("192.168.0.25");
IPEndPoint endPoint = new IPEndPoint(ip, port);
If you only had the host name, you would do:
string hostName = "MyComputerName";
int port = 5555; // or int.Parse(txt_Port.Text); ???
IPHostEntry hostEntry = Dns.GetHostAddresses(hostName);
IPEndPoint endPoint = new IPEndPoint(hostEntry[0], port);
Don't use Dns.GetHostEntry() -- if there's no reverse-lookup (PTR) record for that name, it will fail. Use Dns.GetHostAddresses(). And I have no idea why you think you needed the loop unless you have IPv6 addresses for the same host name you were providing. If not, just use [0] - it should be the first and only IP that will be returned that you'll be using if not using IPv6. But again, since you already have the IP, just plug that in - no need to do the lookup. It helps you eliminate Dns.GetHostName(), too - just use 192.168.0.25.
For your reference, MSDN has a procedure for your synchronous socket send/receive here:
https://msdn.microsoft.com/en-us/library/kb5kfec7(v=vs.110).aspx
and asynchronous socket send/receive here:
http://msdn.microsoft.com/en-us/library/bew39x2a(v=vs.110).aspx
Since I despise link only answers, and you seem to be mixing these 2 methods by using Send() and EndReceive(), respectively to the links above, I will endeavor to describe its contents succinctly and help fix your code:
Basically they say to use a StateObject class, instead of the global variable MyUDPClient you have:
public class StateObject
{
public byte[] buffer = new byte[1024];
public Socket workSocket;
public StringBuilder sb = new StringBuilder();
}
You would create a socket and add it to that. Buffer serves as a way to tell the Receive() or EndReceive() the size of the chunk you want to read back from the response at one time, and sb will serve as a placeholder for the response.
It looks like you have a lot going on here: a SendtoTarget_Click to do a one-off test from the form, and your listener. Your SendtoTarget button does a synchronous send, your StartUDP_Click() does an asynchronous receive.
You would change your SendtoTarget_Click() event to be this (which never defined your socket, before, and you must connect to it before sending):
private void btn_SendtoTarget_Click(object sender, EventArgs e)
{
IPEndPoint TargetIP = new IPEndPoint(IPAddress.Parse(txt_Send2IP.Text),int.Parse(txt_Send2Port.Text));
byte[] Message = Encoding.ASCII.GetBytes("TEST TEST TEST");
// Create a UDP socket.
Socket sender = new Socket(AddressFamily.InterNetwork,
SocketType.Stream, ProtocolType.Udp);
try
{
// Connect to the remote endpoint.
sender.Connect(TargetIP);
// Send message -- already contains the endpoint so no need to
// specify again
sender.Send(Message, 0, Message.Length, SocketFlags.None);
sender.Close();
}
catch (Exception)
{
// do something here...
}
}
For your listener, you can do:
private void CreateUDPClient()
{
IPEndPoint TargetIP = new IPEndPoint(IPAddress.Parse("192.168.0.25"), 5555);
// Create a UDP socket.
Socket receiver = new Socket(AddressFamily.InterNetwork,
SocketType.Stream, ProtocolType.Udp);
try {
// Create the state object.
StateObject state = new StateObject();
state.workSocket = receiver;
// Begin receiving the data from the remote device.
receiver.BeginReceive(state.buffer, 0, 256, 0,
new AsyncCallback(ReceiveMessage), state);
} catch (Exception e) {
Console.WriteLine(e.ToString());
}
}
and your function called ReceiveMessage(), does this:
private void ReceiveMessage(IAsyncResult IAR)
{
string response = String.Empty;
try {
// Retrieve the state object and the client socket
// from the asynchronous state object.
StateObject state = (StateObject) IAR.AsyncState;
Socket client = state.workSocket;
// Read data from the remote device.
int bytesRead = client.EndReceive(IAR);
if (bytesRead > 0) {
// There might be more data, so store the data received so far.
state.sb.Append(Encoding.ASCII.GetString(state.buffer, 0, bytesRead));
// Get the rest of the data.
client.BeginReceive(state.buffer, 0, 256, 0,
new AsyncCallback(ReceiveCallback), state);
} else {
// All the data has arrived; put it in response.
if (state.sb.Length > 1) {
response = state.sb.ToString();
}
// Signal that all bytes have been received.
client.Close();
}
ProcessMSG(response);
CreateUDPClient(); // personally, I would re-create than calling BeginReceive directly
} catch (Exception e) {
Console.WriteLine(e.ToString());
}
}
Did my best to integrate your code with MSDN's in a way that should work. You might be able to get away with assigning that socket to the StateObject and calling BeginReceive() on it, again - not sure. But don't re-use the UdpClient object like that. Use the StateObject class like on MSDN and use it ONLY as your listener.
