The Composition Time(CTS) when wrapping H.264 NALU's

Question

The h.264 hardware compression card procedures NALU's from captured video.

I am trying to wrap the NALU's into FLV and I almost succeed.

I don't know how to fill the Composition Time field in FLV for each NALU.

According to the FLV spec, http://download.macromedia.com/f4v/video_file_format_spec_v10_1.pdf, E.4.3.1.

CompositionTime Composition time offset

See ISO 14496-12, 8.15.3 for an explanation of composition times. The offset in an FLV file is always in milliseconds

Then look into the ISO 14496-12,8.15.3 , Page 24 and 26

provides the offset between decoding time and composition time. Since decoding time must be less than the composition time, the offsets are expressed as unsigned numbers such that CT(n) = DT(n) + CTTS(n) where CTTS(n) is the (uncompressed) table entry for sample n.

How can I know the DT and CTTS in each NALU? or how to caculate the CT without DT and CTTS?

Thank you

Amazonas

When storing video stream with B-Frames, PTS (Presentation timestamp) may be larger than DTS (Decoder timestamp). It happens because b-frame requires frames following after it do be decoded. – Amazonas

Answer 1

For MPEG-4 H.264 transcoders that deliver I-frame, P-frame, and B-frame NALUs inside an MPEG-2 transport, the resulting packetized elementary streams (PES) are timestamped with presentation time stamps (PTS) and decoder timestamps (DTS) in time units of 1/90000 of a second.

The NALUs come in DTS timestamp order in a repeating pattern like

I P B B B P B B B ...  

where the intended playback rendering is

I B B B P B B B P ... 

(This transport strategy ensures that both frames that the B-frame bridges are in the decoder before the B-frame is processed.)

For FLV, the Timestamp (FLV spec p.69) tells when the frame should be fed to the decoder in milliseconds, which is

timestamp = DTS / 90.0

The CompositionTime (FLV spec p.72) tells the renderer when to perform ("compose") the video frame on the display device in milliseconds after it enters the decoder; thus it is

compositionTime = (PTS - DTS) / 90.0 

(Because the PTS >= DTS, this delta is never negative.)

Guttapercha

How can we calculate the DTS of a frame in NAL stream? – Refugiorefulgence

Both PTS and DTS are encoded in the PES packet as defined in Table 2-21 of ISO 13818-1 (MPEG-2 specification). – Guttapercha

The compositionTime is unsigned int in MP4 but signed int in FLV. And it is possible the PTS <= DTS in FLV. – Unbridled

Answer 2

I think I have understood the CTS. it is only for B-frames. Because B-frames may depends fowarding frames to decode, so the CTS means when this B-frame can be decoded, usually that means all the depended frames are received.

Amazonas

What about frame type? Are you also setting the frame type to 2 while streaming B frames? – Superelevation