EDIT: I thought you were experimenting, but I see the code came from the OpenGL tutorial. I glanced through it and understand your point now. It's difficult to learn the basics from there.
NURBS Background
The best way to get a grasp with NURBS is to play with it interactively. You'd then gain the intuition about the edge-defining points (on the edges), shape defining ones (every other), the tangent-relation between them and continuity. NURBS can be made of patches, stitched together at the edges, where continuity is highly controlled - namely you can ask for G3 for car's main body or C1 for a cheap game model. It's really difficult to get the concept from any description. It you want to get it this way, I'd highly recommend the trial of Rhino Nurbs Modeller. I used it years ago and now it seems abandoned, but still it is the software with one of the best NURBS support out there (Autodesk 3d Studio MAX and MAYA have worse). It might be a little time consuming though, for starters I'd recommend playing with something simpler; take the applet from the "Simple Bezier Curve Editor" page for a spin.
To understand NURBS it's also good to consult Wikipedia Article about Bezier Curves. Once you get a grasp of relation between point position and the final curve shape you can easily generalize it to surfaces. I find this animation highly intuitive:
![Code Explanation]()
You can imagine the surface from your example as a set of four of those curves, with a cloth spanned on them. Using the applet I linked earlier, you can play with the position and get instant feedback on the resulting shape. Notice the t parameter - it is a coordinate along the curve and has a range of [0, 1]. The NURBS surface have two of those coordinates, by convention called u and v (that's important for the drawing function).
So, the ctrlpoints structure from the code holds all point coordinates. Simplifying for explanation, those are four cubic Bezier curves (the ones from the animation). For each curve you have four points within 3 dimensions. If you disregard the Y-axis, then all of them lie on a grid, with X and Z being: -1.5, -1.0, 1.0, 1.5. That explains a total of 32 values (4x4 for X plus 4x4 for Z).
The rest is the height, Y-values. In your case it is the second value of every point in ctrlpoints. To get your expected result, you can make all Y values equal on the edges (outer ones) and slightly raised in the middle (4 inner). You'll get:
![NURBS Bump Surface]()
Points used to render above image:
GLfloat ctrlpoints[4][4][3] = {
{{-1.5, 1.0, -1.5}, {-0.5, 1.0,-1.5 }, {0.5, 1.0, -1.5 }, {1.5, 1.0,-1.5}},
{{-1.5, 1.0, -0.5}, {-0.5, 2.0,-0.5 }, {0.5, 2.0, -0.5 }, {1.5, 1.0,-0.5}},
{{-1.5, 1.0, 0.5}, {-0.5, 2.0, 0.5 }, {0.5, 2.0, 0.5 }, {1.5, 1.0, 0.5}},
{{-1.5, 1.0, 1.5}, {-0.5, 1.0, 1.5 }, {0.5, 1.0, 1.5 }, {1.5, 1.0, 1.5}}
};
// ^ ^ ^ ^
// | | | |
// | | | |
// \_________ Those are most relevant - Y-coord, height ______/
NURBS in OpenGL with GLUT - API walkthrough
I see OpenGL API is hiding quite relevant details. The NURBS surface is drawn using Evaluator and is defined with the Map function.
You're supposed to define control points in the init(void) function, like so:
glMap2f(GL_MAP2_VERTEX_3, 0, 1, 3, 4,
0, 1, 12, 4, &ctrlpoints[0][0][0]);
Good explanation of the function can be found on the MSDN Site for glMap2f. We are passing control points, their type and the details such as array stride and order.
You can draw it using an Evaluator function. It takes two coordinates as arguments and gives back a point in 3d space. Those input coordinates are exactly the u and v I mentioned earlier, under the animation. In our example:
glBegin(GL_LINE_STRIP); // we'll draw a line
// take 31 samples of a cross-section of the surface
for (i = 0; i <= 30; i++)
// for each sample, evaluate a 3d point
glEvalCoord2f((GLfloat)i/30.0, (GLfloat)j/8.0);
// notice j is constant in the loop here, but
// is being changed by the outer loop.
//
// j is iterated in 9 steps, so we'll end up
// with 9 lines
glEnd();
I deliberately omitted the outer loop, which is described here:
// we want 9 lines
for (j = 0; j <= 8; j++) {
// OpenGL state machine will be used to draw lines
glBegin(GL_LINE_STRIP);
// inner loop for j-th line along X
glBegin(GL_LINE_STRIP);
// inner loop for j-th line along Z
glEnd(); // done with the lines
}
Working example
#include <stdlib.h>
#include <GL/glut.h>
GLfloat ctrlpoints[4][4][3] = {
{{-1.5, 1.0, -1.5}, {-0.5, 1.0,-1.5 }, {0.5, 1.0, -1.5 }, {1.5, 1.0,-1.5}},
{{-1.5, 1.0, -0.5}, {-0.5, 2.0,-0.5 }, {0.5, 2.0, -0.5 }, {1.5, 1.0,-0.5}},
{{-1.5, 1.0, 0.5}, {-0.5, 2.0, 0.5 }, {0.5, 2.0, 0.5 }, {1.5, 1.0, 0.5}},
{{-1.5, 1.0, 1.5}, {-0.5, 1.0, 1.5 }, {0.5, 1.0, 1.5 }, {1.5, 1.0, 1.5}}
};
void display(void)
{
int i, j;
glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
glColor3f(1.0, 1.0, 1.0);
glPushMatrix();
glRotatef(25.0, 1.0, 1.0, 1.0);
for (j = 0; j <= 8; j++) {
glBegin(GL_LINE_STRIP);
for (i = 0; i <= 30; i++)
glEvalCoord2f((GLfloat)i/30.0, (GLfloat)j/8.0);
glEnd();
glBegin(GL_LINE_STRIP);
for (i = 0; i <= 30; i++)
glEvalCoord2f((GLfloat)j/8.0, (GLfloat)i/30.0);
glEnd();
}
glPopMatrix();
glFlush();
}
void init(void)
{
glClearColor(0.0, 0.0, 0.0, 0.0);
glMap2f(GL_MAP2_VERTEX_3, 0, 1, 3, 4,
0, 1, 12, 4, &ctrlpoints[0][0][0]);
glEnable(GL_MAP2_VERTEX_3);
glMapGrid2f(20, 0.0, 1.0, 20, 0.0, 1.0);
glEnable(GL_DEPTH_TEST);
glShadeModel(GL_FLAT);
}
void reshape(int w, int h)
{
glViewport(0, 0, (GLsizei) w, (GLsizei) h);
glMatrixMode(GL_PROJECTION);
glLoadIdentity();
if (w <= h)
glOrtho(-5.0, 5.0, -5.0*(GLfloat)h/(GLfloat)w,
5.0*(GLfloat)h/(GLfloat)w, -5.0, 5.0);
else
glOrtho(-5.0*(GLfloat)w/(GLfloat)h,
5.0*(GLfloat)w/(GLfloat)h, -5.0, 5.0, -5.0, 5.0);
glMatrixMode(GL_MODELVIEW);
glLoadIdentity();
}
int main(int argc, char** argv)
{
glutInit(&argc, argv);
glutInitDisplayMode(GLUT_SINGLE | GLUT_RGB);
glutInitWindowSize(500, 500);
glutInitWindowPosition(100, 100);
glutCreateWindow(argv[0]);
init();
glutDisplayFunc(display);
glutReshapeFunc(reshape);
glutMainLoop();
return 0;
}
