How to do search and replace involving fields in Microsoft Word?

Question

I have a Word document with fields of the reference variety, which occur in the form "[field].[field]"--in other words, there's a period between the two fields. I want to globally replace this with a space.

Word offers the ^d special character to search for fields, but for some reason the query "^d.^d" does not find anything. However, ".^d" does. Now comes the problem, however--what do I specify as the replacement text in order to retain the field code? If using regular expressions, I could use a "Find What Expression" such as \1, but with regexp ("wild card") mode the ^d is not permitted.

I guess I could write a macro...

Bonded

You mean "^d" without the dot? word.tips.net/T001112_Finding_Fields.html – Covalence

Answer 1

It's usually better to go the macro route when finding fields because, as you say, the find algorithm that Word uses doesn't work the way you might hope with fields.

But if you know exactly what the fields contain, you can specify a search pattern that will probably work (however not in wildcard mode).

For example, if you want to look for figure number field pairs such as

{ STYLEREF 1 \s }.{ SEQ Figure \* ARABIC \s 1 }

(which would typically be the same set of fields everywhere in the document)

If you only really need to look for the following:

{ STYLEREF 1 \s }.<any field>

you could ensure that field codes are displayed and search for

^d STYLEREF 1 \s ^21.^d

or

^19 STYLEREF 1 \s ^21.^19

If you need to be more precise, you can spell out the second field as well.

"^d" only works for finding the field beginning, not the field end.

It's a shame that ^w wants to find at least 1 whitespace character because otherwise it would be more robust to look for

^19^wSTYLEREF^w1^w\s^w^21.^19

Perhaps someone else knows how to work around that without using wildcards?

Unmoor

Answer 2

I would like to add to Bibadia's solution.

An example of an index entry field; we want to change a name we misspelled.

• Make sure hidden formatting is displayed (toggle with SHIFT+CTRL+F8).

• Make sure wildcards option is not selected. To search for fields, use the opening and closing field braces code (optionally use ^w for spaces, as Bibadia suggested):

  ^19 XE "Deo, John" ^21

• Replace won't recognize field braces character, but will allow to insert the clipboard's content. ;). To do that, insert in text the correct entry. CTRL+F9 to insert field and type:

  XE "Doe, John"

• Select the field above and copy

• Use

  ^c

  in the replace box

• Hit Replace All

Ta-da!

Hatchett

The replacement tokens ^19 and ^21 are not replacing with opening closing field codes in Word for Mac 16.72. Are there different tokens for MacOS? Is there a way to convert curly braced plaintext into a field? – Gynecoid

Answer 3

Torzaburo, I suggest that you do this using a macro. You can start by recording the macro, and later refining your processing steps within the macro.

First turn on the hidden characters by navigating to Home > Paragraph > toggle the show/hide Paragraph symbol. Also, select all and toggle the field codes on (right-click and select "Toggle Field Codes".

Open a new blank Word doc in addition to the one you have open. You will use this later. Start the macro recording and find the field using the "^d" (field code) as you said.

When the field is found, copy only the field text within the brackets, and not the full field reference. While the macro is still recording, ALT + TAB to the new blank document and paste the field code in as plain text.

At this point, do the necessary find & replace processing to the field codes. Highlight the processed field codes, copy, ALT + TAB back to the original document, and paste back between the { } brackets.

Stop the macro recording. Add any further custom processing to the macro VBA.

Select-All and re-toggle the field codes. Update the field codes.

Pyrogallol

Answer 4

You don't need a macro. Just toggle all field codes on by using Alt+F9. Then do a find and replace for what you want to change. Once the replacement is complete, use Alt+F9 again to toggle the field codes back off.

Crocker

Answer 5

Disclaimer: I didn't originate this solution, but it's clean and elegant and I thought it should be included here:

(Adapted from Search & Replace Field Codes in Word):

1. Create or find a single instance of the field you want to convert text to
2. Toggle Field Codes visible (AltF9)
3. Copy the code for the field you want to use to the Clipboard (highlight and CtrlC)
4. Open the Replace dialog box (CtrlH), insert the text you want to replace in the Find What box and then enter ^c in the Replace With box.

This will replace your text with the contents of the Clipboard, turning it into the field code you copied in step 3. It also copies formatting information (font, color, etc.), to control how the field will appear when hidden. (Caveat: I've tested this with Word 2003 under Windows 7 only.)

Ophthalmic

Answer 6

Coming in late on this, probably way too late for Beth (sorry Beth). And this may not be quite what Beth was looking for. But for anyone interested ...

It sounds like Beth may have created captions throughout the document using INSERT CAPTION (hence the presence of field codes). This means these captions will have been (automatically) created in CAPTION style.

To globally replace the separator "." with " " (space) in such captions, take two steps:

[1] Go to REFERENCES | INSERT CAPTION, then click on NUMBERING and replace the SEPARATOR "." with "EM-DASH". This will replace all separators in captions for the selected label in the CAPTION Window. If you have other labels in use in the document (e.g. FIGURE), select the other labels one by one and repeat this process.

[2] Do a find/replace searching for special character "em-dash" (^+) in style CAPTION, replacing with " ". Click REPLACE ALL.

Voila!

NOTE: This presumes that em-dash does not appear in the caption text anywhere. If it does, then you'll need to do a pre- and post- "fiddle" to ensure these em-dashes are not touched by the global replace above.

The "pre-fiddle" is to do a global find/replace across captions, replacing the em-dash ("^+") with some other string (e.g. "EM-DASH") that doesn't ever occur in any caption's text. Then you do the separator change as described above. Finally, the "post-fiddle" is to restore the em-dashes that were in the captions, by doing a global replace of the string "EM-DASH" with the actual em-dash character "^+".

Foregoing